SKU: KIT-SMP200-IWS10 200W Mono-Channel Class D Subwoofer Amplifier + 10" 200W Pro Series In-Wall Home Theater Subwoofer

A Match Made in Heaven
This new bundle was made for one another and we're finally bringing them together to bring them to you.
This kit includes the 10" Pro Series In-Wall Home Theater Subwoofer and the 200W Mono-Channel Class D Subwoofer Amplifier.
10" 200W Pro Series In-Wall Home Theater Subwoofer
Few components add more to the home theater experience than a subwoofer. A subwoofer is designed to reproduce the lowest of audible frequencies and will give you that spine-tingling rumble effect that takes you out of reality and into the plot. The beauty of OSD Audio in-wall subs is that you'll experience that thunderous, room-filling bass without filling up floor space. An excellent in-wall subwoofer at an excellent price, the OSD-IWS10 is a 10-inch passive subwoofer with power handling up to 200 Watts. Installation is easy with our "easy in" mounting bracket that mounts to the sheet-rock after the cut-out hole has been made. The grille is also paintable to match your room decor and we include a cutout template that doubles as a paint shield.
200W Mono-Channel Class D Subwoofer Amplifier
Our SMP200 Class D Digital Subwoofer Amplifier may be compact, but with 200W of power, this little amp packs a powerful punch. Designed to power passive subwoofers used in home theaters or whole house audio systems, the SMP200 measures less than nine inches wide and 10 inches deep but supplies an in-wall or stand-alone subwoofer with the power it needs so you can experience that gut wrenching, heart pounding low frequency impact (bass) on movie and music soundtracks. The advanced crossover circuit can be set at different frequency ranges (35Hz to 160Hz) and can be adjusted with the front-panel control knob. Other features include front-panel adjustable phase and volume controls to dial in just the right amount of low frequency effects (LFE).
Warning: California's Proposition 65

Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
10" 200W Pro Series In-Wall Home Theater Subwoofer
Features:
- Speaker Type: 10" In-Wall Subwoofer
- Woofer: 10" Polypropylene with Rubber Surround
- Frequency Response: 38Hz - 200Hz +/-3dB
- Power Handling: 200 Watts
- Sensitivity: 2.83V/1m: 86 dB
- Impedance: 8 Ohms
- Inputs: Spring Binding Posts
- "Easy In" Mounting Bracket for Easy Installation Included
- Paintable Grille & Frame Included
- Integrated Rear Dust Shield
200W Mono-Channel Class D Subwoofer Amplifier
Features:
- Amplifier Type: Subwoofer
- Amplifier Class: Digital Class D
- Channels: 1
- Power Output: 200 Watts @ 4 Ohm
- Power Output: 120W RMS @ 8 ohm w/ 240W Peak
- Power Output: 200W RMS @ 4 ohm w/ 400W Peak
- Frequency Response: 20Hz-160Hz +/-1dB THD: 1%
- Variable Crossover: 35Hz-160Hz
- Variable Phase Switch: 0 to 180 Degrees
- Impedance: 8 Ohm and 4 Ohm Stable
- Signal to Noise Ratio: 95dB
No Questions asked yet!